机夹式枪钻

这些钻头的直径从11.52mm到65.00mm 。仅5种刀片尺寸可覆盖整个范围。

刀片可直接安装，无需调整即可生产出尺寸大的孔。

钻头利用螺钉固定在导向板上

Indexable gun drill
The diameter of these drills ranges from 11.52mm to 65.00mm. Only 5 blade sizes can cover the entire range.

The inserts can be directly installed and can produce large-sized holes without adjustment.

The drills are fixed on the guide plate using screws

机夹式枪钻具有断屑效果好，高进给，更换刀粒便捷等传统传统枪钻无法比拟的加工优势，但是加工孔径公差范围太大，对交叉空克服效果差，对加工机床稳定性要求高等方面又导致他的通用性不是很好。一般在盲孔，管板，棒料孔等要求不高的领域使用
The indexable gun drills have processing advantages that traditional gun drills cannot match, such as good chip breaking effect, high feed rate, and convenient tool replacement. However, the tolerance range of machining aperture is too large, the effect of overcoming cross gaps is poor, and the high requirement for machine tool stability leads to its poor universality. Generally used in areas with low requirements such as blind holes, tube plates, and bar material holes

优点Advantages
适用于车床，加工中心和深孔加工机。
通过专门开发的尖端几何形状来形成芯片小片来实现高效率
缩短因磨损零件的快速更换而导致的停机时间
易于使用，无需磨锐，无需调节长度，易损件库存。
通过全涂层，边缘处理和可转位设计，延长了刀具寿命
由于备有易损件和最常见的尺寸，因此可快速提供。
三角形刀片具有3个切削刃。 正前角排屑器和排屑槽的几何形状允许使用的进给速度是传统枪钻的进给速度的3至4倍。 它们由微粉碳化物制成，并具有多种PVD耐磨涂层。
Suitable for lathes, machining centers, and deep hole machining machines.

Efficient chip formation through specially developed tip geometries
Reduce downtime caused by rapid replacement of worn parts
Easy to use, no need for sharpening, no need to adjust length, inventory of vulnerable parts.
Extended tool life through full coating, edge treatment, and indexable design
Due to the availability of vulnerable parts and the most common sizes, it can be quickly provided.
The triangular blade has three cutting edges. The geometric shape of the front corner chip conveyor and chip groove allows for a feed speed of 3 to 4 times that of traditional gun drills. They are made of micro powder carbides and have various PVD wear-resistant coatings.

枪钻米兰体育：
医疗器械，汽车燃料系统，玻璃工业和许多其他应用都可以通过使用整体硬质合金长笛钻在很小的孔上钻孔而受益。 管状结构枪钻的尖端没有钎焊接头，从而提供了更高的强度，从而提供了更好的穿透率和工具寿命。 然而，如此小直径的枪钻要求遵循特定的操作参数以确保成功。 我们很高兴提供专家级的应用工程来实现这一目标。

Gun drilling application field:

Medical devices, automotive fuel systems, glass industry, and many other applications can benefit from drilling small holes using integral hard alloy flute drills. The tip of the tubular gun drill does not have a brazed joint, providing higher strength and better penetration rate and tool life. However, such a small diameter gun drill requires following specific operating parameters to ensure success. We are pleased to provide expert level application engineering to achieve this goal.